Acoustic Soundproofing Foam Kit overall size 50"x 84"

Tired of unwanted noise disrupting your space? Our acoustic foam is the perfect solution for noise control, helping to absorb sound and improve the acoustic of any room! Whether it’s for a home, theater, recording studio, office or any other space, our high-quality foam reduces echoes and sound transmission, creating a quieter, more comfortable environment.

Kit Includes:

 Overall Size (50"x 84")

(40) Stylish Tiles 17"long x 5-1/2" wide x 3-1/2" Thick 

(10) Stylish tiles 8-1/2'' long x 5-1/2'' wide x 3-1/2'' Thick

Please note you will have to assemble to get the desired look

IF YOU BUY A SECOND KIT YOU WILL GET THAT KIT FOR $89.99 (price is reflected in checkout)

 PLEASE NOTE: The foam gets cut with a water-jet machine, because of this there are some natural lines to the edges of the foam. It is not damaged. We do not accept returns for this reason, unless the product has been damaged. Please consider this before placing an order!

MATERIAL: 2 lb Density Flame-retardant open-cell/Urethane-Ether Foam
FEATURES: Make you room look amazing. It’s easy, and lightweight so that it can be quickly installed and look good at the same time. With this kit you do not have to cover the whole wall with acoustic tiles. You can group pieces together or separate the pieces, which will soundproof your room.

APPLICATIONS: Residential, Commercial, and Industrial

Flammability: MVSS 302 Flame Tests, Flame-Retardant.

COLOR: Charcoal

 3 1/2” Foam Tiles: Recommended in big or medium size rooms where the best absorption is needed, with low frequency problems.

 Studio Foam Columns: Columns are designed to absorb mid bass to low frequency energy. They are perfect for treating corners and anyplace on the wall where bass frequencies tend to peak.

Helps to create Acoustically “sound deadening” effect for rooms, with a lot of bouncing sound waves.

 Our Acoustic Wedge Kit is a wonderful product for absorbing sound waves, but do not mistake “sound absorption” for “sound blocking.” Acoustic foam will not block sound from going through it. To block sound you need heavy, dense material. Acoustic foam does help to make sound waves less and are a good solution for sound absorption. This is why it is used to treat a room with a lot of echo or reverberation. It helps to create an acoustically “sound deadening” effect for rooms, with a lot of bouncing sound waves.

 If you need to sound block your room, please contact us. Our heavy dense material is 1/4" or 1/2" thick, sound Barrier that goes at the bottom of each tile.

 Installation Tips

1.    If you apply our spray adhesive glue lightly, only on the back of the tiles this will leave a temporary bond.

2.    If you apply our adhesive glue to both the mounting surface and the back of the tiles this will leave a permanent bond.

3.    For a stronger permanent bond make sure you spray both surfaces and allow adhesive to dry and tacky before bonding.

4.    For clean cuts, try an electric knife instead of scissors or a utility knife. (Scissors and utility knives usually leave a jagged edge)

5.      Most customers glue tiles with silicone-based caulk. For portability, you could attach Velcro stripes or put double stick tape.