Regicell Filter Foam
Available Thickness: 1/2", 3/4" , 1', 1-1/4", 1-1/2", 1-3/4", 2"
Available Sizes: 52” x 76” * 26” x 76” * 26 x 38”
This Regicell foam is made out of polyurethane foam which is commonly use for Filters and Speaker Applications. The pores are more open which provides more air flow or liquids to penetrate faster.
Rigicell has a medium density feel and provides a good filter solution for air conditioning, regular vacuum cleaners, air conditioning, hair dryers, furnace-OEM-replacement and dust bag collectors for homes, schools and industrial places. The open pores, provides high air flow but traps dust and other harmful partials from coming in.
Can be use in any house, school or industrial applications such as for industrial or regular vacuum cleaners, air conditioning, hair dryers, furnace-OEM-replacement, industrial panels, electric equipment, projector equipment, and dust bag collectors.
You can also use it for small engines, air compressors, motel unit ventilators, oil-mist eliminators, automotive air cleaner, high dust holding capacity filters in central-heating and A/C systems
Also a good foam to separate water from gasoline, perchloroethylene, and jet fuel
Not only that but can reduce noises in microwave, air craft, industrial machines and high intensity sounds
If you have any left over of this foam you can use it floor scrubber pads, lint free wiper for clean rooms, pre-filter for liquid filter, black board erasers, and paint brush applicators.
Best way to cut the open cell foam is with a sharp knife or electric turkey knife, just repeat in 1 direction over and over again in one direction to get a clean cut. Please note that if you order these size sheets they may be bigger than actual size as listed.
Please note: When comparing different types of foam with other companies it is most important to look at the density and ILD of the foam.
Foam density is a specific measurement of how much weight in pounds polyurethane foam can handle per cubic foot. This density rating tells you the strength of the foam. The height the number the longer the foam will last. It should not be used exclusively as a sign of durability or comfort, because firmness and lifespan of foam products like mattresses and cushions, depend on many factors, including density. The density may vary slightly between each foam shipments.
ILD or IFD measurement firmness of how hard or soft a foam is. The higher number the foam is, the firmer the foam is. Also represents how many pounds the foam will hold before it collapse. If you take a block of foam 12″ x 12″ x 12″ cube, after the certain ILD is reach that foam will collapse.
We vacuum pack the foam to reduce on shipping cost. you will have to give the foam 1-2 days to come back to its original shape. It will look a little misshaped and not measure to correct size until after you let it expand back out.