Corner Kit for Ceiling- Small
APPLICATIONS: Residential, Commercial, and Industrial
Available Sizes: 3.5", 5.5"
Length: 24" Long
This Kit Comes with 3 Bass Absorbers and 1 Block
This acoustical foam absorber is designed to be mounted in ceiling corners. With the help of one Foam Cube and three acoustic bass absorbers you can make your cathedral corners look outstanding. It is especially useful for trapping bass that is more intense at the intersection of walls, like in large area rooms. The rolling pattern front provides increased area for greater sound absorption and will smooth out low frequencies.
* Please note: there may be air holes or “birthmarks” that cannot be controlled or replaced. If you need to see a picture of what it looks like please let us know.
* We vacuum pack the foam to reduce on shipping cost. Please opened package right away and you will need to give the foam 1-2 days to come back to its original shape. It will look a little misshaped and not measure to its correct size until after you let it expand back out.
* To remove the corner blocks/ bass traps off of the wall (without adhesive glue) try to use a steamer and then you may need liquid paint thinner.
Please note: When comparing different types of Acoustic foam with other companies it is most important to look at the density and ILD of the foam. All of our acoustic foam has a 1.7lbs density and ILD of 70.
All Noise Studio Control foam is a California 117 flame retardant specification, class B type. Please look at specs sheet for more details and our disclaimer.
Also, please check your building codes before installing our acoustic foam. Different building codes apply to different locations. Our foam will not pass the E84 Test