Outdoor Foam

Home
Contact Us
Custom Cut Foam
Sofa Replacement
Foam Mattresses
High Density Foam
Noise Control Foam
Foam Packaging
Closed Cell Foam
Outdoor Foam
Crown Molding
Polystyrene
Medical Foam
Child Safety Foam
Foam Accessories
Upholstery Work
Drapery Valances


Drain Dry Foam
Replace your flat patio or boat cushions with drain dry Foam.
Custom Sewn Cushions are available

To place the order online click on this page http://www.foamexpress1.com/

This out door foam has open cell structure and is perfect for areas where your cushions get wet.

Dries almost immediately after exposure to: rain, salt spray, melting snow, morning dew, washing, or other types of moisture and humidity. Large, open pores permit maximum water drainage and air circulation, allowing use quickly after being wet or even saturated. Drain Dry foam is long lasting wear and comfort combined with extremely fast drying properties.

 





Water easily passes though this EZ-Dry polyurethane foam.

 

Recommended for:
 

* Outdoor furniture such as seat and back cushions and mattresses.
 

* Boat or marine cushions, golf carts, pool, patio or grading cushions.
 

* Can also be used under Phifertex material and for filtering or padding whatever is exposed to large amounts of water.
 

* Any type of padding whatever is exposed to large amounts of water.
 

50 ILD EZ-Dry Foam
Pore Size 35 ppi
Density 2.0 lbs./ft.3
Tensile 8.0 psi
Elongation 25 %
Tear 2.0 lbs/in
IFD 25%R (15"x15"x4") 50 lbs
Compression Set 50% 15%




Eggcrate waterproof foam is also available.

 

50 ILD is for Seat and Back Cushions
Full Sheets (50 ILD) Price Shipping Estimate
1/2" x 48" x 116"  $ 34.85 $ 12.00
   1" x 48" x 116"  $ 69.85 $ 14.00
   2" x 48" x 116" $ 139.85 $ 17.00 - $44.00
   3" x 48" x 116"  $ 208.85 $ 20.00 - $55.00
   4" x 48" x 116" 

   $ 278.85

$ 26.00 - $60.00
   5" x 48" x 116" 

   $ 348.85

$ 32.00 - $62.00
   6" x 48" x 116" 

   $ 417.85

$ 38.00 - $ 72.00
Half Sheet (50 ILD) Price Shipping Estimate
1/2" x 24" x 116" (OR) 1/2" x 48" x 58" $ 18.85 $ 11.00
1" x 24" x 116" (OR) 1" x 48" x 58" $ 37.85 $ 12.00
2" x 24" x 116" (OR) 2" x 48" x 58" $ 75.85 $ 15.00
3" x 24" x 116" (OR) 3" x 48" x 58" $ 113.85 $ 17.00
4" x 24" x 116" (OR) 4" x 48" x 58" $ 150.85 $ 19.00 - $ 45.00
5" x 24" x 116" (OR) 5" x 48" x 58" $ 188.85 $ 24.00 - $ 40.00
6" x 24" x 116" (OR) 6" x 48" x 58" $ 226.85 $ 26.00 - $ 55.00
     
Q. Sheet (50 ILD) Price Shipping Estimate
1/2" x 24" x 58" $ 10.85 $ 9.75
1" x 24" x 58" $ 20.85 $ 10.75
2" x 24" x 58" $ 40.85 $ 11.75
3" x 24" x 58" $ 60.85 $ 12.75
4" x 24" x 58" $ 81.85 $ 13.75
5" x 24" x 58" $ 101.85 $ 14.75
6" x 24" x 58" $ 121.85 $ 15.75

 Consider these advantages for your outdoor recreational cushions: 

Sheds Water Like A Sieve, yet provides the seating comfort. Large, completely open pores (reticulation) permit rapid draining and maximum air circulation for fast drying.

Unique Proprietary Formulation enhances strength and durability for long term exposure to sun and inclement weather. 

Resistant to Most Chemicals including most cleaning agents, solvents, alkalies, and acids (bleach may cause rapid discoloration). Built-in fungicidal additive inhibits fungus, mildew-important for retarding stain and odor. 

Compound Shapes For Unusual Cushion Designs may be easily fabricated. Dry Fast cushions can be shaped the same as conventional foam.

Comfort; Dry Fast cushions may also be lightly over wrapped with non-woven fiber padding for extra      
plushness. After wrapping, test cushions to insure proper drainage. Adjust padding density as necessary. 
Pores should not be blocked with adhesive.

Dacron Foam

OUT DOOR FIRE RETARDANT SOUND ABSORPTION
Dacron Foam:
2.8 Density / Polyester Cushion Padding
Material Tested Meets the Requirements of California Technical Bulletin (CAL TB) Section C.

* Flame Resistant                           * Environmentally Friendly       * Mildew Resistant
* 100% Recyclable/Sustainable    * Acoustical Performance         * Hypoallergenic
* 3-Dimensionally Moldable           * Washable / Quick Drying       * Light Weight

 


gymnastic foam pits

 

Aircraft Bus Acoustical Rail Automotive Marine Furniture Medical

 

Full Roll 60ft x 62" wide x 2" thick   $158.00 Please email us with your zip code and amount of Dacron Foam you want.
Half Roll 30ft x 62" wide x 2" thick   $85.00
62" Wide, 2" Thick, Price Per Foot    $3.46

 

INCHES

Please note: Dacron may be laminated

FULL SHEET
80 x 96
(Sq Ft 48)

HALF SHEET
40 x 96
(Sq Ft 24)

Q. SHEET
40 x 48
(Sq Ft 12)

STRIPS
26 x 96
(Sq Ft 16)

3

$ 96.00

$ 54.85

$ 27.85

$ 35.85

4

$ 128.00

$ 69.85

$ 36.85

$ 47.85

5

$ 160.00

$ 86.85

$ 45.85

$ 58.85

6
Two pieces of 3" thick will be glued together.

$ 192.00

$ 104.85

$ 54.85

$ 70.85

 

High density quality outdoor Dacron which is resistant to harsh weather conditions.
Please email us your zip code and the thickness of Dacron foam desired for a shipping quote.

Custom Cut Dacron Foam is available. Call in for size and prices.

 

Please note this that Dacron Foam can not be returned once order. It is best to order 1" thicker because during shipment this type of foam does not like to recover to is full thickness. Also please make sure that this package is open right away after receiving  the package for the best results.

 

SAMPLE BURING TIMES
# 1 Did Not Ignite
# 2 Did Not Ignite
# 3 Did Not Ignite
# 4 Did Not Ignite
# 5 Did Not Ignite
AVERAGE N/A
Retirements Individual 7.0 Minimum, or did not ignite or self extinguished
METHOD California Technical Bulletin (CAL TB) 117, Section C
SAMPLE 6.0 x 3.0 inches panels cut from sample supplied by client
This Section of testing sub contracted to an outside facility not A2LA accredited

 

TEST STADARD TEST STANDARD CRITERIA RESULTS
ASTM D 3675 Flame Spread Index <=25 7.9
ASTM E 662 Smoke Density Flaming 90 Seconds 100 Maximum 4 Minutes 200 Maximum Non Flaming 90 Seconds 100 Maximum 4 Minuets 200 Maximum 323413
FAR PART 25 APPENDIX F Part 1 (12 Sec. Vertical Burn
After Flame TimeAverage Burn Length <= 8 Inches<=5 Inches 21

 

  

Insulite Foam

Flotation With Adhesive Glue is available for $42.00 per sheet.

Firm Flotation Foam design for the Boat industry! 
A great choice for Boats, Marinas, Patios, Pools, Seat Pads, Yards


Black not available.

* Isolation : Steel from Masonry     
* Metal from metal (curtain walls etc.)

To secure the sealing of joints and seams, this glue adhesive backing is strong and is suitable for Formica. It can stick on rubber, glass, leather, wood, sponge, plastic, paper, cement, fabric, and other surfaces. Just cut to size and peel off the backing- it's that easy!
If you would like a sample please call or e-mail us.


* Closed Cell Expanded Polyvinyl Chloride, Good Tensile
* Good Chemical Resistance & Temperature serviceability

* Best way to cut the closed cell foam is with a sharp knife or electric turkey knife, just repeat in 1 direction over and over again in one direction to get a clean cut. Please note that if you order these size sheets that may be bigger then actual size as listed below.
*
Please note this that Insulite Foam can not be returned once order.
More Info On Insulite, Flotation Foam

Description Price
1/2" Thick
(tan only)
Price
1" Thick
(tan only)
Price
1-1/2" Thick
(tan only)
Optional Shipping
75ft Long x 56" Wide n/a n/a $ 1,487.00 (not in stock) Please email us with your zip code and what size for shipping.
72" long x 56" Wide $ 55.85 $ 110.65 $ 150.85
56" Long x 56" wide $ 46.85 $ 89.85 (2 left) $ 121.85 (5 left)
1ft Wide x 56" Long
Can be one continues
roll up to 6 feet
$ 11.95 $ 22.85 $ 27.85

 

Description: Green (Firm) Price Optional Shipping
38" x 47" x 1" $ 44.85 Please email us with your zip code and what size for shipping.
38" x 72" x 3/4 $ 69.85
39" x 72" x 1" $ 69.85  (not in stock)
50" x 72" x 1" $ 79.85  (not in stock)

Nomaco Black IUT 10
Soft Cellular Rubber Flotation Foam
designed for the Boat industry

     

(not in stock, special order)

Polymer- Vinyl Nitrile

Specifications:
ASTM-D-1056-67: SCE41
ASTM-D-1056-85: 2C1

Flammability:
UL94: VO1
FMVSS 302: Pass1

Physical Properties:
25% Compression Deflection (PSI): 1.5-3
Density (PCF): 3-4.5
Temp. Range degree Fahrenheit: -30/+175
Ozona Resistance: Good

A great choice for Boats, Marinas, Patios, Pools, Seat Pads, Yards.
* Isolation : Steel from Masonry     
* Metal from metal (curtain walls etc.)
* Closed Cell Expanded Polyvinyl Chloride, Good Tensile
* Good Chemical Resistance & Temperature serviceability

 

Regicell Foam
 

Recommended for Speakers and Filters
 


Speaker Filter

Color : Black
PPI: 30
Density : 1.72 lbs. / ft. cubed
CLD@40%: 0.87 psi
Tensile Strength : 20.3 psi.
Elongation : 84.0(%)
Cell Count: 33 ppi.
Air Flow: Average 5300 L/(m2*s)
Temperature Resistance: -40 degree F. to 212 degree F.


Filter for your humidifier

Description:  Speaker Foam Price Optional
Shipping
Full Sheet  39" x 79" x 1/2" $ 32.85 $ 9.50
Full Sheet  39" x 79" x 3/4" $ 48.85 $ 10.50
Full Sheet  39" x 79" x 1" $ 64.85 $ 12.50
Full Sheet  39" x 79" x 1 1/4" $ 80.85 $ 14.50
Full Sheet  39" x 79" x 1 1/2"  $ 96.85 $ 16.50
Full Sheet  39" x 79" x 1 3/4" $ 112.85 $ 16.50
Full Sheet  39" x 79" x 2" $ 128.85 $ 18.50
Description:  Speaker Foam Price Optional
Shipping
Half Sheet  19" x 79" x 1/2"   $ 16.85 $ 10.50
Half Sheet  19" x 79" x 3/4"   $ 25.85 $ 10.50
Half Sheet  19" x 79" x 1/2" $ 33.85  $ 10.50
Half Sheet  19" x 79" x 1" $ 42.85 $ 11.50
Half Sheet  19" x 79" x 1 1/2"   $ 50.85 $ 11.50
Half Sheet  19" x 79" x 1 3/4"  $ 59.85 $ 12.50
Half Sheet  19" x 79" x 2" $ 67.85 $ 12.50
Description:  Speaker Foam Price Optional
Shipping
Quarter Sheet 19" x 39" x 1/2"   $ 9.85  $ 8.50
Quarter Sheet 19" x 39" x 3/4"   $ 13.85 $ 8.50
Quarter Sheet 19" x 39" x 1" $ 17.85 $ 8.50
Quarter Sheet 19" x 39" x 1 1/4" $ 22.85 $ 9.50
Quarter Sheet 19" x 39" x 1 1/2"   $ 26.85 $ 9.50

Quarter Sheet 19" x 39" x 1 3/4"

$ 31.85

$ 10.50

Quarter Sheet 19" x 39" x 2"

$ 36.85

$ 10.50
Characteristics: A reticulated, open pore, flexible, ester type of polyurethane foam. Characterized by a skeletal structure of strands which provide a constant 97% of void space and a very high degree of permeability.
Recommended for: high dust holding capacity filters in central-heating and A/C systems.
Filter Applications: small engines, air compressors, hair dryers, face masks, vacuum cleaners, air conditioning, school & motel unit ventilators, oil-mist eliminators, automotive air cleaner, home furnace-OEM-replacement, industrial panels, electric equipment, projector equipment, and dust bag collectors.
Coalescing: separation of water from gasoline, perchloroethylene, and jet fuel,
Noise Suppression: microwave covers, air craft, industrial vacuum cleaners, high intensity sounds.
Miscellaneous: power puffs, floor scrubber pads, filter in hydraulic line, lint free wiper for clean rooms, pre-filter for liquid filter, paint brush applicators, black board erasers, foundation for ceramic & metallized high tech filters, and blood oxygen stordefoamers.

Home | Contact Us | Custom Cut Foam | Sofa Replacement | Foam Mattresses | High Density Foam | Noise Control Foam | Foam Packaging | Closed Cell Foam | Outdoor Foam | Crown Molding | Polystyrene | Medical Foam | Child Safety Foam | Foam Accessories | Upholstery Work | Drapery Valances

.
TO PLACE AN ORDER YOU CAN E-MAIL US.
OR Call (248)-837-2430 OR Call (248)-284-0002

 
Copyright 2014. Foam N More & Upholstery, Inc. All rights reserved.